Haltech Nexus S3 Plug 'n' Play ECU and Adapter Harness Kit - Toyota LandCruiser 1FZ-FE

This adapter harness kit lets you fit a Haltech Nexus S3 ECU into your Toyota LandCruiser 1FZ-FE wiring loom, without cutting or splicing the factory harness.

The Nexus S3 succeeds the Elite 2500 and carries over its full feature set with the added processing power of the Nexus platform. It has 8 peak/hold injector drivers and 8 low current ignition outputs, both of which double as low side drive outputs, plus 6 dedicated low side drive outputs with PWM capability. Four push-pull/half bridge outputs (8A, PWM capable) cover electronic throttle duties, alongside a single ECR output. Eleven 0-5V analog inputs give redundancy for the throttle and a switchable 5V pullup, and the trigger and home inputs use differential inputs with adjustable thresholds and glitch filters. Six synchronous pulsed inputs read cam sensors, frequency inputs or further 0-5V analog signals. The ECU carries an onboard wideband controller for NTK and LSU 4.9 sensors, a 4 bar MAP sensor, two CAN ports with switchable termination, and onboard logging of up to 300 channels at sample rates to 1kHz with 128MB of internal memory. This kit suits Plug 'n' Play replacement of the factory ECU on MY95-97 Toyota LandCruiser 80 Series with the 1FZ-FE engine, manual transmission only, and supports the sub tank transfer system. European delivered models should have their ECU pin-out confirmed with Haltech before ordering. Spare ignition outputs can be wired, via custom wiring, to convert from a distributor to a direct fire ignition system with six individual coils.

• Plug 'n' play harness, no factory wiring cut
• 8 injector drivers and 8 ignition outputs, both reassignable as low side drives
• Onboard wideband controller for NTK and LSU 4.9 sensors
• 4 bar onboard MAP sensor and two CAN ports with switchable termination
• Onboard logging: up to 300 channels at 1kHz with 128MB memory

In the box: Nexus S3 ECU, injection moulded plug 'n' play adapter harness, M14 x 1.5 air temperature sensor with matching plug and pins, auxiliary I/O 16 pin Tyco plug and pins.

Suits:

• Toyota LandCruiser 80 Series, 1FZ-FE, MY95-97, manual transmission only

Please note: European delivered models should have their ECU pin-out confirmed with Haltech before ordering.